ARI-myValve

Your valve sizing program for Control – Isolation – Safety – Steam trapping

If the valve type and/or the size is not yet determined, we are offering our assistance for sizing.
Please use our calculating program ARI-myValve.

Contents / Module:

• Control valves (STEVI^® for industry applications and STEVI^®-H for HVAC applications)
  Sizing of flow quantity Kv, volume flow Q, pressure drop p, sound level;
  Selecting the valve size with given capacity; Selection of the actuator.
• Butterfly valves - triple offset (ZETRIX^®)
  Sizing of flow quantity Kv, volume flow Q, pressure drop p, sound level;
  Selecting the valve size with given capacity; Selection of the actuator.
  Calculation of torque for actuators in flow from shaft side and flow from disc side, as well as dynamic torque curves to show the maximum value and the opening angle at which it is reached.
• Pressure reducing valves (PREDU^®) / Excess pressure regulator (PREDEX^®)
  Sizing of valve-size incl. actuator size with given temperature, capacity, inlet and outlet pressure.
• Temperature controller (TEMPTROL^®)
  Sizing of flow quantity Kv, sound level and selecting the valve size and controller size with given capacity.
• Pressure regulating valves (PRESO^®)
  Sizing of valve-size with given temperature, flow, set pressure, opening pressure and set pressure.
• Stop valves (FABA^®, STOBU^®), Check valves (CHECKO^®), Balancing valves (ASTRA^®/ASTRA^®-Plus)
  Sizing of valve-size with given temperature, flow and operating pressure.
• Process valves (STEVI^® AS)
  Sizing of valve-size incl. actuator with given temperature, flow, and operating pressure.
• Safety valves (SAFE DIN EN, SAFE ASME, REYCO^® R & RL)
  Sizing of valve-size with given capacity, temperature, set pressure and back pressure;
  Calculation acc. to SAFE DIN EN, AD2000, ASME VIII, API520
• Steam traps (CONA^®)
  Sizing of steam trap systems with given flow capacity or heat capacity.
  Calculation of nominal diameter acc. to given pressure, condensate quantity, condensate sub-cooling and speed.

Media:

Integrated media-databank (more than 160 media) with conditions:

• Gas / vapour
• Steam (saturated and superheated)
• Liquids
• Compressed air
• Own media can be managed and additional information can be retrieved.

Special features:

• Project administration of the calculation and product data incl. spare part drawings relating to the project and tag number
• Direct output or calculation and product data in PDF format
• Product data could be taken for a direct order
• SI- and ANSI-units with direct conversion to another databank
• Settings with over pressure or absolute pressure
• All ARI valves are integrated in a databank
• Direct access relating to the product on data sheets, operating instructions, pressure-temperature-diagram, controller characteristics, spare part drawings and CAD-symbols on the website.
• Operation in company networks possible (no complex installations on individually PC‘s necessary)
• Extensive catalogue extending over several product groups

A program DVD can be ordered by phone +49 5207 / 994-0,
fax +49 5207 / 994-297 or E-Mail.